Prastara

What Drawings Do You Need for a Fit-out Quotation in Dubai?

What to send for an accurate fit-out quotation in Dubai: layout and ceiling plans, finishes schedule, scope, BOQ, MEP needs, location and programme.

The drawings and documents to send for an accurate fit-out quotation in Dubai: plans, ceilings, finishes, scope, BOQ, MEP, location, programme and landlord rules.

Short answer: for an accurate fit-out quotation in Dubai, send architectural layout plans, reflected ceiling plans, a finishes schedule, a scope of works, a BOQ if you have one, MEP coordination requirements, the location, the target programme and the landlord's or authority's conditions. The more complete the package, the fewer assumptions the contractor has to price.

A quotation is only as good as the information behind it. This applies whether you are a consultant issuing a tender, a brand rolling out a new shop or a homeowner planning a villa. When drawings are missing, each contractor fills the gaps differently, and the quotes stop being comparable. This guide lists what to send, what each document tells the contractor and what happens if it is missing.

The core package

Architectural layout plans

Dimensioned plans showing walls, partitions, doors, joinery positions and furniture layout. They set the quantities for most of the work.

Reflected ceiling plans

Ceiling types, levels, bulkheads, lighting positions, AC grilles, access panels and sprinkler heads. Ceilings and their coordination with services are a common source of missed cost.

Finishes schedule

Floor, wall and ceiling finishes room by room, with materials named by brand and code or by an equivalent standard. Add fire ratings for public areas.

Scope of works

A written description of what is included and what is not: strip-out, MEP, signage, furniture, IT, kitchen equipment and so on. It prevents the most common misunderstanding, which is that one side assumed something was included.

Bill of quantities, if available

A BOQ lists each item, its quantity and its specification, so every contractor prices the same thing. It is helpful but not always essential; a contractor can take off quantities from good drawings. See our checklist before issuing a fit-out BOQ.

MEP coordination requirements

Where lights, power, data, AC, drainage, extraction and fire and life safety systems need to change. Even a simple marked-up layout helps.

Joinery drawings

Elevations and sections of reception desks, display units, panelling, wardrobes and counters, with materials and finishes. Joinery is often a large share of the cost and is hard to price from a plan alone.

The context

Location

The building, mall or community. It tells the contractor which landlord rules, working hours and permit route apply.

Programme

Your target start, handover and opening dates. A compressed programme can change methods, shifts and prices.

Landlord and authority conditions

The landlord's or mall's fit-out guide, design criteria and any comments already received. Requirements differ by location and change over time, so check current requirements with the landlord and authority.

What happens when something is missing

Missing itemTypical effect on the quote
Reflected ceiling planCeiling and services priced on assumptions
Finishes scheduleAllowances instead of firm prices
Joinery detailsProvisional sums or wide variation between bidders
MEP requirementsServices excluded or priced loosely
Landlord fit-out guideWorking hours, deposits and rules not allowed for
Scope of worksInclusions and exclusions differ between quotes

Checklist before you send

Questions

Can I get a quote with only a layout plan?

You can get an indicative figure, but it will rest on many assumptions. For a firm, comparable quote, add ceilings, finishes, joinery details and MEP requirements.

Do I need a BOQ to get a fit-out quotation?

No. A BOQ makes quotes easier to compare, but a contractor can measure quantities from complete drawings. If there is no BOQ, ask each contractor to price the same drawing set.

Should I send drawings in PDF or CAD?

Both if possible. PDFs show the intent and revision; CAD files let the contractor measure accurately and prepare shop drawings later. Make sure the PDF and CAD sets carry the same revision, so nobody prices an older layout.

What does the contractor need to know about the landlord?

The fit-out guide, working hours, delivery rules, deposits and any design criteria. These affect both price and programme. See fit-out approvals in Dubai.

What should come back with the quote?

A priced breakdown, assumptions, exclusions, provisional sums and material options. See what drives fit-out cost in Dubai.

How Prastara handles drawings

Prastara reviews the drawings and clarifies assumptions, exclusions and material options before pricing. At Prastara we send our questions back before we price, because a written answer costs less than a wrong assumption. Our joinery is made in our own workshop in Jebel Ali. See turnkey fit-out and how we work.

Send drawings for a priced proposal.

More insights