Most frequently asked questions

Product Information

For its performance and durability, brick is hard to beat as a material in India.

Concrete, like liquefied stone frozen in time, assumes the shape and characteristics of whatever formwork it is poured into. Unlike glass and steel, which hide their true nature with smoothed surfaces and neatly detailed edges, concrete embraces its inherent imperfections, leaving behind a tactile record of its construction.

Concrete and poured-block footings and foundations will last a lifetime, assuming they were properly built. Waterproofing with a bituminous coating lasts 10 years, but if it cracks, it is immediately damaged.

Our material is constructed by rough solidification and rigid finish in a term as a concrete panel and fashion floor … Precast concrete facades bring buildings to life. Precast technology offers endless possibilities in terms of look and design.

We have discovered that tantalum carbide and hafnium carbide materials can withstand scorching temperatures of nearly 4000 degrees Celsius.

The fireretardant paint helps that fire does not spread in case of fire in a building. Therefore, it is one of the most efficient measures to prevent fire spreading rapidly, as it contributes flame and smoke not to spread

The consequence of poor acoustics can be substantial for both productivity, learning and healing. The right absorbing products can create comfortable spaces with a positive impact


Precast concrete was introduced in a wide variety of applications in the facades of house buildings in the post-war period, for example, as small panels attached to loadbearing structural frames, as insulated sandwich panels used in exterior cladding, and as claustra in decorative open screens.

Paint your mouldings first and once they are dry, tape the moulding edge (or buy a moulding paint gadget), then paint the wall colour. 

When it comes to choosing the right paint sheet for crown moulding, flat paint doesn’t have the same kind of kick as high-gloss paint. Additionally, you can go for a darker, contrasting, analogue or complementary shade.

Remove glue residue from the rear of the moulding or the subsurface by brushing the surface with a layer of adhesive solvent. Allow the solvent to dissolve the glue, then scrape the glue away using the putty knife’s edge.

You can now paint your baseboards, trim and drywall walls in the same paint. That means the same colour and sheen which is extremely helpful for DIYers. Below are two examples of walls, baseboards, door frames, doors, and wainscoting all painted in the same colour and gloss all in the same paint.

The ideal Installation temperature is 18-22 degrees celsius and 65-72 degrees Fahrenheit. Installing Flexible Casings.

Indirect Lighting

Prastara only serves customers everything related to Concrete Facades. But we also have a brand called Led world and Desroch where we can provide lightings for all needs.

A common question for those who are new to LEDs is “how to install LED strip lights under counters and cabinets.” The process is easy and has a very similar set of steps in both cases. Even if you do not have advanced knowledge of electronics the project can be done as a DIY project — although it’s always a good idea to consult an electrician first before working with electricity.

If you’re installing LED lights with a low-end wattage, then 12V tapes are ideal. For example, our 4.8W and 9.6W white LED strip lights both draw 12V. … Higher-wattage LED tapes, such as our 14.4W, 19.2W or 24W white strip lights, need the power of a 24Vdriver.

The brightness of LED strips is determined using the metric lumens. Unlike incandescent bulbs, different LED strips can have different levels of efficiency, so a walt.

Streaks or specks of light in your vision are described as flashes. They can happen when you bang your head or get hit in the eye. They can also appear in your vision because your retina is being pulled by the gel in your eyeball. Flashes should be taken seriously if you’re seeing them frequently.

Your power source to your LED strip light will connect your red wire to the red wire on the transformer.

You use a three-quarter inch or larger double-sided foam tape you’re going to need to trim it off if you use a half-inch. It should fit right on there. And you won’t need to do any trimming.

Thus, it is recommended that the mould temperature be set to 130℃ to 150℃. In contrast, if the mould temperature is high, the cooling time of the moulded product will be long, which is disadvantageous to the moulding cycle.

It is possible to install LED headlights upside down, but this will make them dangerous – as they might blind other drivers or have misaligned beams. Ensure the diodes are horizontal and the shield, if the bulb has one, is at the bottom.


Still have questions?